Straight copper tubes for HVAC, refrigeration and industrial fabrication inquiries. From outside diameter to final packing, define the details your project needs and request a quotation by specification.
Select a thumbnail to enlarge. Browse all seven photos of tube surfaces, ends, bundles and packing.
The table lists actual outside diameters used in common ACR inquiries. Plumbing nominal sizes follow a different convention. Always state the actual OD, wall and governing standard.
| Actual OD · inch | Actual OD · mm |
|---|---|
| 1/4″ | 6.35 mm |
| 3/8″ | 9.52 mm |
| 1/2″ | 12.70 mm |
| 5/8″ | 15.88 mm |
| 3/4″ | 19.05 mm |
| 7/8″ | 22.22 mm |
| 1 1/8″ | 28.58 mm |
| 1 3/8″ | 34.93 mm |
| 1 1/2″ | 38.10 mm |
State dimensions as outside diameter × wall thickness, in mm or inches. Include the minimum acceptable wall, any required internal diameter and the drawing revision. Wall thickness must be matched to the intended duty and standard.
Common industry references include 3 m, 5 m and 6 m straight lengths. Request the exact length, cut-length tolerance, end finish and bundle weight that suit your production and freight plan.
Dimensions are inquiry references, not a stock list. Supply range, tolerances and application suitability are confirmed against the selected material, standard and order requirements.
Not necessarily. ACR tube is commonly identified by actual outside diameter; plumbing tube may use a nominal size. Provide the actual OD and standard to avoid a mismatch.
Yes. Include the required length, tolerance, deburring, end caps and bundle or case requirements in your inquiry. The quotation confirms the available processing and packing.
Provide the application, design requirements, drawing and destination market. The required wall and governing standard should be specified for your system; the product photos alone do not establish a pressure rating.
Copper pancake coils for ACR and fabrication inquiries. MOQ: 250 kg, 500 kg or 1 metric ton, depending on the specification.
Copper sheets and plates for forming, conductive blanks, thermal parts and architecture. Explore thicknesses, panel sizes, finishes and packing.
Round, square and hexagonal copper bars for machining, conductive parts and thermal components. Explore dimensions, grades and cut-length requirements.